Panasonic AJ-HPM100P Operating Instructions Manual page 38

16.
P2 card slot number and hard disk drive status
1
P2
P2 card and USB hard disk drive status is indicated as
described below.
The number of the P2 card slot that
1 1 6 1 6 6
-
contains a P2 card is indicated in white.
(white)
The number of the P2 card slot of the P2
1 6 6 1 6
-
card that contains the clip at the cursor
(yellow)
position is indicated in yellow. When a
clip spans multiple P2 cards, the
numbers of all the slots housing cards
that contain the clip are indicated.
◆ NOTE:
The pink frame indicates either of the following
conditions for an inserted P2 card.
• [RUN DOWN CARD]
The card has been overwritten the maximum
number of times.
• [DIR ENTRY NG CARD]
Directory structure does not conform to
standard specifications.
Gray indicates that the USB host mode is
not engaged or that it is but no hard disk
(gray)
drive is connected.
White indicates that the USB host mode is
engaged and that the hard disk drive is
(white)
available.
Yellow indicates that the USB host mode
is engaged and that clips on the hard
(yellow)
disk drive appears as thumbnails.
Red indicates that the USB host mode is
engaged and that the hard disk drive
(red)
does not permit copying.
17.
Status message
Shows messages indicating processing status. For
example, screen updating shows an [UPDATING] text
message and a rotating
38
Clip Management: Thumbnail and Clip Management
2 3 4 5 6
HDD
W
icon.