Adding And Registering Audio Split Point (Changing Registered Point); Trimming The Audio Split Point - Panasonic AJ-HPM100P Operating Instructions Manual

Adding and Registering Audio Split Point (Changing Registered Point)

You can add an audio split to an event registered in the play
list and change the audio split point.
1
2

Trimming the Audio Split Point

You can change audio split points in frame increments (in 4-
frame increments at 24PN).
1
2,3
1
Open the play list screen.
2
Use the cursor buttons to select the event where you
want to change an audio split point.
86
Using Play List: Audio Split Editing
3,5 4
4
1
Open the play list screen.
2
Use the cursor buttons to select the event where you
want to add (or change) an audio split point.
3
Press the EVENT button.
This activates the event edit mode.
4
Register the audio split point.
Use the operation buttons or search dial to look for a
location for an audio split point. Then hold down the SPLIT
button and press the ENTRY button.
5
Press the EVENT button to end registration.
◆ NOTE:
• Addition can take place even when the IN point is changed
before step 4 or the OUT point is changed after step 4.
3
Change the audio split point.
Hold down the SPLIT button and press the TRIM+ button
or the TRIM– button. The IN point is incremented or
decremented in frame increments (in 4-frame increments
at 24PN).
◆ NOTE:
• During trimming the split point is indicated in black numerals
against a yellow background in the event list display of the event
list split screen.