Using Sd/Sdhc Memory Cards; Displaying Miscellaneous Sd Memory Card Information; Formatting Sd Memory Cards - Panasonic AJ-HPM100P Operating Instructions Manual

This unit supports SD/SDHC memory cards.
◆ NOTE:
• Current SETUP menu settings can be saved to and loaded from an
SD memory card. For details, refer to page 128.
Displaying Miscellaneous SD
Memory Card Information
Use the following procedure to display SD memory card
status on screen for checking.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [PROPERTY] –
[DEVICE] – [SD CARD] and press the SET button.
The following information may also appear depending on
card status.
SD STANDARD:
104
Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards

Using SD/SDHC Memory Cards

Indicates that an SD memory
card is formatted according to
the SD/SDHC standard.
SUPPORTED: Complies with SD/
SDHC
NOT SUPPORTED: Does not
comply with SD/SDHC
USED:
BLANK:
TOTAL:
NUMBER OF CLIPS:
PROTECT:
• This unit cannot record proxies.
4
Press the SET button and the MENU button to end
processing.

Formatting SD Memory Cards

Use the following procedure to format an SD memory card
inserted in an SD memory card slot.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to select [OPERATION] –
[FORMAT] – [SD CARD].
4
Select [YES] and press the SET button.
The card is now formatted.
◆ NOTE:
• To cancel formatting, select [NO] and press the SET button.
5
Press the SET button (check) when the completion
message appears.
Used capacity (bytes)
Free space (bytes)
Total capacity (bytes)
The number of clips on an SD
memory card when clips have
been copied to an SD memory
card using a proxy or a P2
camera recorder.
Write protected