Changing Settings; Change Operations - Panasonic AJ-HPM100P Operating Instructions Manual

The menus on the LCD monitor or a monitor (when the SUPER switch on the right side of the LCD monitor is set to "ON")
connected to the ANALOG COMPOSITE MONITOR OUT connector make it possible to change settings.

Change Operations

5
3,4
1,5
1
Press the MENU button.
The setup menu screen appears on the LCD monitor and
the counter display indicates the setup menu number.
2
Select the file to change.
• Hold down the SHIFT button and press the FF
or the REW button to switch to the next or previous
file.
3
Select items to change.
Turn the search dial or press the up (▲) or down (▼)
buttons to move the cursor (*) to the item you want to
change.
• Use the search dial in JOG mode.
• Turn the dial clockwise to increment item numbers
(001➝002➝003➝004➝) and counterclockwise to
decrement them.
• To switch to the next item, hold down the PLAY
button and press the FF
switch to a previous item, hold down the PLAY
and press the REW

Changing Settings

4,5
2 3,4
button
button or the + button. To
button
button or the – button.
4
Change set values.
Select the item to change, hold down the STILL/PAUSE
button and turn the search dial or press the left (b) or
right (a) button to change the setting.
• Turn the dial clockwise (or press the right (a) button) to
increment the set number and turn it counterclockwise
(or press the left (b) button) to decrement it.
• Release the STILL/PAUSE button after making the
change.
• In the SHTL mode, set the search dial to the center
position or items will move.
• Repeat the operations described in steps 3 and 4 when
there are more items to change.
5
Finalize the change.
Press the MENU button.
In the confirmation message that appears, press the SET
button to accept the change or press the EXIT button to
cancel it. The menu closes after this operation.
Making changes using the PF buttons
1,3
You can assign three of the items that are most often changed
to the PF buttons to enable quick changes of the setting
values.
2
Setup: Changing Settings
107