Panasonic AJ-HPM100P Operating Instructions Manual page 122

Item
FR SUPER
No. DISP.
677 LCD ASPECT
680 CC (F1) BLANK
681 CC (F2) BLANK
684 EDH(SD)
685 ESR MODE(SD)
688 CC REC
689 COMP MODE
690 UMID REC
691 UMID GEN
122
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 AUTO Specifies the aspect ratio of image displayed on the LCD panel.
0: Switches aspect ratio automatically.
0001 4:3
1: Displays 480i or 576i images in the 4:3 aspect ratio.
0002 16:9
(Displays 1080i or 720p video in the 16:9 aspect ratio.)
0003 15:9
2: Displays images in the 16:9 aspect ratio.
3: Displays images in the 15:9 aspect ratio.
NOTE:
Since the LCD monitor on this unit has an aspect ratio of 15:9, a black border may appear
above and below the picture in AUTO or 16:9 mode.
0000 BLANK Turns on and off closed caption signals in the first field output from the SD SDI and analog
0001 THRU composite output.
0: Signals are forcibly blanked.
1: Signals are not blanked.
NOTE:
• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.
• In EE mode, the closed captions are output with the VITC signal.
0000 BLANK Turns on and off closed caption signals in the second field output from the SD SDI and
0001 THRU analog composite output during playback.
0: Signals are forcibly blanked.
1: Signals are not blanked.
NOTE:
• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.
• In EE mode, the closed captions are output with the VITC signal.
0000 OFF Specifies whether or not EDH is superimposed on serial output signals.
0001 ON 0: Signals are not superimposed.
1: Signals are superimposed.
0000 OFF Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit.
0001 AUTO 0: ESR is forcibly set to off.
1: ESR is automatically turned on and off depending on operating mode.
NOTE:
• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.
0000 OFF Specifies whether or not the closed caption signal that is superimposed on the SD SDI and
0001 ON analog composite input signals will be recorded.
0: Not recorded.
The EE output is also blanked.
1: A closed caption signal that is superimposed on an input signal is recorded.
NOTE:
• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.
• When 1394 is selected as the input signal, the closed caption signal superimposed on
the compressed input signal is recorded in its original form regardless of settings in this
menu.
0000 NORMAL Selects the compression method used during video recording.
0: Records using normal compression processing.
0001 DARK
1: Records video suppressing compression video distortion that is generated by dark
areas that are about 10 IRE (70 mV) or less.
NOTE:
This setting is available in DVCPRO HD 720p mode recording.
0000 OFF Specifies whether or not UMID data should be recorded.
0001 ON 0: UMID data is not recorded.
1: Recorded.
0000 INT Specifies the generation method of UMID information that is recorded when menu No. 690
0001 EXT UMID REC is set to on.
0: Newly created UMID information is always recorded.
1: Records UMID data superimposed on the input signal.
Newly created UMID information is recorded when not superimposed on an input signal.
Settings and brief function description