Panasonic AJ-HPM100P Operating Instructions Manual page 140

Priority Monitor display
15 BUSY
16 INT SG
17 NO INPUT
18 TEXT MEMO
19 MARK ON/OFF
WARNING information
If "E- * * " Iights in the monitor display, hold down the SHIFT button and press the MENU button to open the DIAG-MENU and
read the warning information.
Priority
No
INVALID EMBEDDED
1 95
2 92 1394 INITIAL ERROR Displayed when the 1394 interface connection is irregular.
3 91 COPY PROTECTED
4 90 NOT 1× 100M SIG
5 04
6 15
7 11
8 12
9 14
10 16 INVALID VIDEO SIG
11 17 INVALID AUDIO SIG
12 18
140
For Long and Trouble-Free Operation: Error Messages
Displayed while clip information is being read or when clip configuration has
changed. No operations can be performed while this display is on the screen.
[Meaning]
• A card has been inserted or removed.
• Updating is in progress
• Recording post processing is in progress
• Other causes
Displayed for the first two seconds when the REC button is pressed to enter
the EE mode and the INPUT SELECT VIDEO button or the INPUT SELECT
AUDIO button is set to SG.
Displayed for the first two seconds when the REC button is pressed to enter
the EE mode and the INPUT SELECT button is set to a connector with no
output except for analog audio signals.
Displayed for two seconds when a text memo is added.
Displayed for two seconds when a shot mark is added or deleted.
Display
Character code
Displayed while synching recorded video frames to the time code of a signal input
to the HD SDI connector when that time code is not advancing at 1× normal
TC
speed. (When "SLTC" is selected in menu No. 032 REC REF.)
Displayed when DV format recording is available and the copy guard signal input
via the 1394 interface is in the copy inhibit mode.
Displayed when a signal input from the 1394 interface is not a DVCPRO HD (100
Mbps) 1× normal speed transfer signal.
Displayed when a signal input from the 1394 interface is not a DVCPRO or DV
UNKNOWN SIG
format signal.
Displayed when a signal input from the 1394 interface is not a DV (25 Mbps) 1×
NOT 1× DV SIG
normal speed transfer signal.
Displayed when a signal input from the 1394 interface is not a DVCPRO (25 Mbps)
NOT 1× 25M SIG
1× normal speed transfer signal.
Displayed when a signal input from the 1394 interface is not a DVCPRO50 (50
NOT 1× 50M SIG
Mbps) 1× normal speed transfer signal.
Displayed when signal input via the 1394 interface differs from the system format
NO MATCH SIG
set on this unit.
Displayed when the compressed video data of a signal input from the 1394
interface is irregular.
Displayed when the audio data of a signal input from the 1394 interface is
irregular.
Displayed when the time code data of a signal input from the 1394 interface is
irregular.
INVALID TC SIG
Description
Description
Counter
Deck operation
display
Operation
BUSY
continues
Operation
INT SG
continues
Operation
NO INPUT
continues
Operation
TEXT MEMO
continues
Operation MARK ON /
continues MARK OFF
Deck operation
Operation
continues
*4
Recording is
disabled
Recording is
disabled
Recording is
disabled
Recording is
disabled
Recording is
disabled
Recording is
disabled
Recording is
disabled
Operation
continues *1
Editing is
disabled
Operation
continues *2
Editing is
disabled
Operation
continues *3
Editing is
disabled