Panasonic AJ-HPM100P Operating Instructions Manual page 124

Item
FR SUPER
No. DISP.
725 REC CH1
726 REC CH2
727 REC CH3
728 REC CH4
731 PB FADE
732 EMBEDDED AUD
775 25M REC CH
776 REF LEVEL
124
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 CH1 Specifies the input signal to be recorded on the audio CH1.
0: Audio input CH1 signal
0001 CH2
1: Audio input CH2 signal
0002 CH3
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH2.
0001 CH2 0: Audio input CH1 signal
1: Audio input CH2 signal
0002 CH3
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH3.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH4.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
0003 CH4 2: Audio input CH3 signal
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 AUTO Specifies audio processing to be performed between clips and edit points created using
play list or edit copy.
0001 CUT
0: Depends on recording status. (Refer to the section "Audio V Fade Function" (page
135).)
1: Forcible cut.
NOTE:
The IEEE1394 connector output is forcibly cut also in the AUTO setting.
0000 OFF Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI
0001 ON output.
0: Audio data is not superimposed.
1: Audio data is superimposed.
0000 2CH
Specifies the number of audio channels that will be used for DVCPRO (25 Mbps) or DV (25
Mbps) recording.
0001 4CH
0: Does not supply microphone current.
1: Records on four channels.
NOTE:
DVCPRO HD, AVC-Intra50 (option) and AVC-Intra100 (option) always record on 8
channels, and DVCPRO50 always records on 4 channels.
For AJ-HPM100P
0000 FS-20 Specifies the standard level.
0: 20 dB
0001 FS-18
1: 18 dB
0002 FS-12
2: 12 dB
For AJ-HPM100E
0000 FS-20
0001 FS-18
0002 FS-12
Settings and brief function description