2. Installation
2.4 Connection to the RS 232 communications port (optional)
OV
2.5 Installation of the communications-card option
Page 16 -
51033212EN/AC
1
22
RD TD
5
4
3 2
1
9
8
7 6
RTS
1. Connect the RS 232 communications cable
port on the computer.
2. Connect the RS 232 communications cable
communications port
1
The UPS can now communicate with all MGE UPS SYSTEMS
supervision, set-up or safety software.
Pin-out diagram for the RS 232 communications port
on the UPS.
Slots for communications card.
3
It is not necessary to shut down the UPS to install
the communications card:
1. Remove the slot cover
2. Insert the card in the slot.
3. Secure the card with the two screws.
22
to the serial
22
to the RS 232
on the UPS.
.
3
1