MGE UPS Systems Comet EXtreme 12 kVA Installation And User Manual page 25

Troubleshooting requiring MGE after-sales support
Indication
LED 12 flashes and the buzzer
beeps.
LED flashes.
13
Signification
UPS electronics have detected a UPS
fault.
Depending on the UPS personalization
parameters (see section 3.5), there are
two possibilities:
the equipment connected to the UPS
continues to be supplied, but directly
from the AC-power source via the
automatic bypass for a maximum of 8
hours (LED ON);
18
the connected equipment is no longer
supplied.
The equipment connected to
the UPS is no longer protected.
A battery fault was detected during the
battery test.
4. Maintenance
Correction
Follow the UPS replacement
procedure (see section 4.2).
Call the after-sales support
department.
Call the after-sales support
department because the
batteries need replacing.
- Page 25
51033212EN/AC