Service And Special Instruction - Clearaudio Innovation Wood User Manual

5. Special instruction
5.1 Maintenance
Innovation
• If the turntable is a longer time not in use, please disconnect the motor from the main
supply.
• Every two years you can lubricate the bearing of the turntable platter with the delivered oil.
In this case it is enough to put 1 or 2 drops of the oil into bearing.
• Please take special caution to any damages of the power cord. Any damages should be repaired only by
authorized personal.
A damaged power cord must be exchanged immediately!
Caution:
Please use only non alcoholic fluids and only fluids specially used for acrylic, to clean the
Innovation turntable.
Otherwise damage on the material or the surface can occur!
Don't use try cloths for cleaning because of the electrostatic charging. Suitable cleaning fluids
will be available at Clearaudio
5.2 Transport
Innovation
Send / ship the
Only in the original packing Clearaudio can provide the warranty. If you repackage the turntable, please
make all steps inverted like at installation and setup (chapter 3).
• If any transportation of the
turntable platter and the shaft holder. Otherwise serious damage can occur!
• To avoid any dust coming into the bearing, the bearing hole needs to be covered as well.
Only if the product is returned in its original packing Clearaudio can provide the warranty.
5.3 Service
In case of any necessary, service for all Clearaudio products should be done by authorized personal only.
In case of any repair, the Clearaudio
Clearaudio distributor, dealer or directly to the Clearaudio factory.
Page 14
(www.analogshop.de)
turntable always and only in the original packing!!!
Innovation
turntable should be necessary, please always remove the
Innovation
Clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Germany
Phone: +49 9131 40300 100
Fax: +49 9131 40300 119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
or your Hifi dealer.
turntable needs to be send to your nearest authorized
Innovation
© Clearaudio electronic GmbH 2016
User manual