Operating Your System From Akeypad; Buzzer Volume; Contrast Adjustment; Brightness Adjustment - Bentel Security Kyo 320 User Manual

OPERATING YOUR SYSTEM FROM A KEYPAD
Read this section thoroughly to get an overall view of
how to operate your system from a Keypad. KYO 320
can manage 32 PREMIUM LCD and/or CLASSIKA
LCD Keypads (Fig.1).
Ø PREMIUM LCD has a larger display with 2 lines and
16 columns and has a built-in Proximity Reader.
Premium LCD keypad provides 3 fast keys for instant
activation of Burglar, Fire and Emergency Alarms (to
be programmed by your Installer);
Ø CLASSIKA LCD has a larger display with 2 lines and
16 columns but on the contrary of PREMIUM keypad
has NOT a built-in Proximity Reader.
CLASSIKA LCD keypad provides 3 fast keys for in-
stant activation of Burglar, Fire and Emergency
Alarms (to be programmed by your Installer)
Figure 1 shows the main components of the PREMIUM
LCD and CLASSIKA Keypads:
1 Function LEDs
2 Display
3 Keys
4 Down flip
5 Information chart
6 Sensitive field
7 Fast Keys

Buzzer Volume

To adjust the volume of the internal buzzer, follow the
procedure described below:
1) Press and keep pressed the ESC key; the internal buz-
1
PREMIUM KEYPAD
7
3
Figure 1 - a) PREMIUM LCD Keypad, b)CLASSIKA LCD Keypad.
4
2
6
a)
zer will start sounding a series of beeps in such manner
that the operator could hear the sound level in real time.
2a) To increase the volume, press key A for a number of ti-
mes and/or keep it pressed until the desired level is obtained:
2b) To lower the volume, press più volte and/or keep
pressed key B until the desired level is obtained.
3) To confirm the chosen level, press the ENTER key
(or wait a few seconds for the keypad to return to the
inactive state).
+
NOTE – The buzzer will still emit a series of sound
alerts at extremely low volume, even if it has been
set to zero.

Contrast Adjustment

To adjust the contrast of the LCD display, press and
hold:
Ø C to increase contrast
Ø D to decrease contrast
To confirm the selected levels, press ENTER (or simply
wait a few seconds to enable the keypad back into the
stand by status) (see the PREMIUM keypad manual for
further information).

Brightness adjustment

The brightness can set in a normal way or in the stand
by status (the keypad enables the stand by status
1
CLASSIKA KEYPAD
7
3
b)
5
2
4
KYO320