Multiple Systems; Digital Key/Card Operations; Disarm (Turning Off Your System); Arm - Global Mode (Turning On Your System) - Bentel Security Kyo 320 User Manual

+
Your Installer may have Disabled
LEDs, therefore, they will not turn ON even when a
valid Key/Card/Miniproxi is used.

Multiple Systems

The Digital Keys/Cards/Miniproxi can be programmed
(by the Installer) to operate on more than one System,
and to manage different Partitions on each System.

Digital Key/Card operations

The Digital Keys/Cards can:
Ø Arm — Global Mode
Ø Disarm
Ø Arm — A Mode
Ø Arm — B Mode
Ø Arm/Disarm Patrol
+
Your Installer may have programmed some "re-
stricted" Digital Keys/Cards. These Keys/Cards will
be allowed to perform a maximum number of ope-
rations (from 1 to 254) after which, they will be Di-
sabled automatically. Disabled "restricted" Digital
Keys/Cards can be re-enabled and refreshed with
the same number of operations via the User Menu
(refer to Enable/Disable Key/Card).
n Disarm (Turning OFF your system)
This operation will Disarm all the Partitions common to
both the Digital Key/Card and Reader in use.
To Disarm the System (all LEDs OFF):
1. Hold the SAT Key/Card/Miniproxi near the sensitive field
of the PROXI Reader — until all the LEDs turn OFF (see Fi-
gure 4a).
+
If the Compatibility with EN50131 option has been
set for a reader, when a SAT key or valid card is
placed near the reader, the GREEN indicator
light will flash briefly and the system will be
DESACTIVATED.
2. Leave the Key/Card from the sensitive field to Di-
sarm the System.
Figure 4 Disarm/Arm/Stop Alarms from ECLIPSE2 reader.
18
the Reader n Arm — Global Mode (Turning ON your system)
This operation will Arm all the Partitions common to
both the Digital Key/Card and Reader in use.
To Arm the System in Global Mode (Red LED ON):
1. Hold Sat key/Card/Miniproxi near the sensitive field
of the ECLIPSE2/PROXI Reader — until the Red LED
turns ON (see Figure 4b).
2. Leave Sat key/Card/Miniproxi from the sensitive field
of a Proxi Reader to Arm the System in Global Mode.
+
If the Compatibility with EN50131 option has been
enabled for a reader, after the Exit time all 3 indica-
tor lights will be switched off to "hide" the control
unit status.
n Arm — A Mode
This operation will Arm or Disarm the Partitions in ac-
cordance with the A Mode Arming configuration (pro-
grammed by the Installer).
To Arm the System in A Mode (Amber LED ON):
From PROXI Readers/ECLIPSE2
1a. Hold the Proximity Key/Card/Miniproxi near the sen-
sitive field of the PROXI Reader. The LEDs will light in
turn (at 2 second intervals).
2a. Remove the Key/Card when the Amber LED turns
ON. At this point, the Red LED will also turn ON and the
System will Arm in A Mode.
n Arm — B Mode
This operation will Arm or Disarm the Partitions in ac-
cordance with the B Mode Arming configuration (pro-
grammed by the Installer).
To Arm the System in B Mode (Green LED ON):
w w
w . b
e n
t e l
s e
c u
r i t y
. c o
m
KYO320