Table 3 Length Of The User Names And Passwords - Siemens SIMATIC NET CP 243-1 IT Technical Manual

Features and Functions
The following user rights can be configured for the 8 other users.
• Read access to process data of the S7-200 system from a Web browser
•
Read and write access to process data of the S7-200 system from a Web
browser
•
Read access to status information of the CP 243-1 IT from a Web browser
•
Access to the file system via the FTP server with the following restrictions
− Only the administrator may access the directory /__S7Sys.
− Only the administrator may store the configuration file for the user ad-
Note
HTML pages can be called by a Web browser without password protection. Pass-
word protection is not activated until process values of the S7200 system are ac-
cessed by such pages.
Note
We recommend not allowing the 8 configurable users access to the FTP. If a user
is permitted access to the FTP, this user has the opportunity to change the configu-
ration data stored in the file system of the CP 243-1 IT.
Note
To keep configuration effort as low as possible with regard to user administration,
we recommend using abstract users with special rights (e.g., "commissioning,"
"maintenance," or "manufacturing") instead of natural users (e.g., "Jack Sprat").
Character set/number for entering user name/password
Role
Administrator
User
Table 3
All ASCII characters between 0x21
password.
40
ministration (.udb file) in the file system of the CP 243-1 IT.
User Name
1 to 16 characters
1 to 32 characters
Length of the user names and passwords
and 0x7E can be used for user name and
HEX HEX
03/03
Password
8 to 16 characters
1 to 32 characters
CP 243-1 IT
J31069-D0429-U001-A0-7618