Table of Contents
Advertisement
Installation and Commissioning
3.1
Dimensions for Installation in a Control Panel
The CP 243-1 IT is equipped with bored holes for installation in a control panel.
Minimum distance of 9.5 mm
between the modules when
installed in the switching
cabinet wirh M4 screws
Fig. 6
Dimensions for installation in a control panel
3.2
Dimensions for Installation on a DIN Rail
The CP 243-1 IT can be mounted on a DIN rail (DIN EN 50 022).
The following figure shows the dimensions of a standard DIN rail.
7.5 mm
Fig. 7
Dimensions for installation on a DIN rail
50
CPU
1.0 mm
CP 243-1 IT
63.2 mm
71.2 mm
35 mm
J31069-D0429-U001-A0-7618
03/03
96 mm
88 mm
80 mm
CP 243-1 IT
Advertisement
Table of Contents
