Siemens SIMATIC NET CP 243-1 IT Technical Manual page 117

03/03
Error Word
Hex Dec
16#003A 58 The module name for the CP
243-1 IT was changed in the
configuration.
16#003B 59 The configuration has an invalid
IP address.
16#003C 60 The configuration has an invalid
gateway address.
16#003D 61 The configuration has an invalid
value in the Keep Alive parame-
ter.
16#003E 62 No valid configuration received
from memory or S7-200 CPU or
via BOOTP
16#0042 66 The NDB contains syntax mis-
takes in the read/write jobs or
lengths.
16#0093 147 The BOOTP job failed.
16#0094 148 The reply of the BOOTP server
contains invalid data.
16#0095 149 The TCP/IP stack did not ac-
cept the specified monitoring
time (Keep Alive).
16#0096 150 The TCP/IP stack did not ac-
cept the IP address specified
for a client.
16#0097 151 The TCP/IP stack did not ac-
cept the specified subnet mask.
16#0098 152 The TCP/IP stack did not ac-
cept the specified gateway ad-
dress.
16#00B0 176 The IDB contains invalid val-
ues.
16#00B1 177 The CRC check of the IDB
failed.
16#00B2 178 No administrator name is speci-
fied in IDB.
CP 243-1 IT
J31069-D0429-U001-A0-7618
Error Byte
Check the configuration.
Check the configuration.
Check the configuration.
Check the configuration.
Cyclic attempt to obtain a
valid configuration either from
the memory of the S7-200
CPU or via a BOOTP server
Check the configuration.
Automatic restart
Automatic restart
Automatic restart
Automatic restart
Automatic restart
Automatic restart
Prepare configuration with
STEP 7 Micro/WIN 32.
Prepare configuration with
STEP 7 Micro/WIN 32.
Check the user program to
see whether configuration
data were accidentally over-
written.
Prepare configuration with
STEP 7 Micro/WIN 32.
Reaction/Correction
Diagnosis
Transfer Rou-
tine
Byte Return
Offset Value
in SM
(ETHx_)
Area
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
117