5 Operating the Application Examples
In the PLC mode
orange:
FB "EbmPapst"
Click the
"EbmPapst".
5.7.2
Brightness
range: 30 to 100%) of the operator panel (only possible when using a real HMI).
5.7.3
User display
When a user logs on, the details (user, password, group and logoff time) are
displayed here. No authorization was assigned in the application example.
Therefore, no user logon is necessary.
Figure 5-12
Click
5.7.4
System
Click
(only possible when using a real HMI).
Controlling several fans (ebm-papst) via Modbus RTU
Entry ID: 109476801,
V2.0,
button to reset the sequencer of the function block
Allows you to regulate the brightness in percent (setting
to log on and
to temporarily disable the touch panel in order to clean it
09/2018
, the header and side bar alternately flash
to log off.
47