Table of Contents
Advertisement
Backside
1
1) Mountingbracket with adjustment screw
2) LCD Display + Menu Buttons
3) Safety Eye
4) Lock On/Off
5) Remote Control
6) Earth connection
Remote Control Operation
Attention: Any control or setting with the remote control will be saved, until the system is rebooted.
The system is always in AUTO show after rebooting.
2
3
ON/OFF:
every mode, excepted SLA mode, press 2 seconds to activate REM mode.
AUTO:
SOUND activated show. The blue music LED indicator is flashing when
sound signal is detected
4 5 6 7 8 9 10 11
7) 3-pin DMX Out
8) IEC Powerconnector
9) Fuse 1,6 A/250V
10) ON/OFF
11) 3-pin DMX In
In
mode, use this button to turn the laser ON / OFF. In
Automatic running show
During a sound-controlled Show, press MUSIC+B+1~9
to set the sensitivity. 9 is the most sensitive.
COLOR CHANGE:
programmed colors
PATTERN CHANGE:
patterns
FIXED PATTERN:
Repeat
Pause
8
Fig. 2
Cycle through the pre-
To show and change 48
Choose your favorite PATTERN from
1 to 48
Advertisement
Table of Contents
