Acquiring Feature Licenses - Lenovo SI4093 User Manual

Flex system fabric system interconnect module
Table of Contents

Advertisement

Acquiring Feature Licenses

© Copyright Lenovo 2016
The base option for SI4093 supports twenty-four total data ports (fourteen
compute node ports and ten uplink ports). Licenses are available that enable the
use of additional ports on the switch:
Upgrade 1—This upgrade feature adds fourteen internal ports (15–28) and two
external 40 Gigabit Ethernet (GbE) ports (57 and 61). If ports EXT15 and EXT19
are configured for 10 GbE, then ports 57 through 64 are enabled.
Upgrade 2—This upgrade feature option adds fourteen internal ports (29–43)
and four external 10 GbE ports (53–56) to the Upgrade 1 feature.
Note: Upgrade 1 is a prerequisite to Upgrade 2.
Upgrade licenses are unique to each switch and are non transferable.
To acquire an upgrade license activation key, purchase the Authorization Code and
locate the unique ID (UID) on the switch serial number (SN) label (bottom or rear
of switch module). The UID is the last twelve characters of the switch serial
number. This serial number is located on the part number (PN) label (bottom or
rear of switch module) and is also displayed during a login to any of the user
interfaces. For example, SN (UID): Y250CM294998. For more information about
locating the switch identification labels, see
page
17.
In the event of the switch replacement, new activation key files based on the serial
number of the replacement unit must be acquired and installed. If the replacement
is handled through Lenovo Service and Support, your original Authorization Code
is transferred to the serial number of the replacement unit.
You can use the Lenovo website to perform the following tasks:
Request a new activation key
Check an authorization code to see what feature it enables and how many
remaining times it can be used to create a key
Retrieve the history of feature activation on a selected device
Retrieve the history of feature activation on a selected authorization code
Retrieve a lost authorization code
Manage your Lenovo customer number
Find help for the Features on Demand feature activation process
Provide feedback to Lenovo about the Features on Demand process
Note: Your Lenovo ID and password are required to log into the Features on
Demand website.
"Before Installing the SI4093" on
Chapter 4: Updating the Firmware and Licensing
51

Advertisement

Table of Contents
loading

Table of Contents