Lenovo SI4093 User Manual page 28

Removing an SFP+ Module
1. Read the safety information that begins on
2. Read the information in
3. Remove the fiber optic cable from the module that you want to replace. For more
4. Unlock the SFP+ module by pulling the wire tab straight out, as shown in the
5. Grasp the wire tab on the module and pull it out of the switch port.
6. Replace the protective caps on the module and the switch SFP+ port.
7. Place the module into a static-protective package.
28
SI4093 System Interconnect Module User's Guide
To remove the SFP+ module, complete the following steps.
page 18.
information about removing the cable, see
page 27.
Attention: To avoid damage to the cable or the SFP+ module, make sure that you
remove the fiber-optic cable before you remove the module from the switch
port.
following illustration.
page 5
"Handling Transceiver Modules" on page
"Disconnecting a Fiber Optic Cable" on
and "Installation Guidelines" on
25.