Signal Menu - Mitsubishi Electric TX10U User Manual

SIGNAL menu

ITEM SETTING
MEMORY CALL
AUTO / MEMORY 1
MEMORY 8
RESOLUTION
(MEMORIZE)
VERTICAL -
FREQUENCY
HORIZONTAL -
FREQUENCY
HORIZ. PIXELS 640-1920
VERT. LINES 360-1200
EXECUTE
OK
CANCEL
OK
HORIZ. POSITION 0-999
VERT. POSITION 0-999
FINE SYNC. 0-31
TRACKING 0-2800
COMPUTER INPUT AUTO
RGB
YC
OVER SCAN 100%-90%
HOLD
OFF / ON
-
C /YP P
B R B R
FUNCTION
Use to select the setting of RESOLUTION (MEMORIZE) already saved.
Impossible to select if no setting has been saved. AUTO is selected by
default. It optimizes the signal format automatically depending on the type
of video signal supplied from the computer. Press the ENTER button to clear
the setting already saved.
The current resolution is displayed. To change the current setting, press the
ENTER button to display the RESOLUTION (MEMORIZE) menu. The new
setting can be saved to MEMORY 1 - MEMORY 8.
The vertical frequency of the currently projected video signal is displayed.
The horizontal frequency of the currently projected video signal is displayed.
The number of horizontal pixels of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE, and then
press the ENTER button, the image is automatically adjusted according to
the resolution you set. The adjustment result can be saved to MEMORY 1 -
MEMORY 8.
The number of vertical lines of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE, and then
press the ENTER button, the image is automatically adjusted according to
the resolution you set. The adjustment result can be saved to MEMORY 1 -
MEMORY 8.
Press the ENTER button to start the automatic adjustment. At the
completion of the automatic adjustment, a message is displayed and you
can save the adjustment result to MEMORY 1 - MEMORY 8.
The process to change the current resolution is canceled and the SIGNAL
menu is displayed.
Use to adjust the horizontal position of the projected image.
Use to adjust the vertical position of the projected image.
Use to eliminate flickering or blur, if appears, viewing the projected image.
Use to eliminate vertical wide stripes, if appears, viewing the projected
image.
The proper setting is automatically selected.
Select this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
Select this option when connecting the projector to a DVD player or other
device having Y, C , and C
B
terminals.
Use to adjust the display area of projected image.
Use to adjust the image when flagging occurs near the top of the screen.
EN-30
(or Y, P , and P ) component video output
R B R