Signal Menu - Mitsubishi Electric DLP XD700U User Manual

Menu operation (continued)

Signal menu

H. Position
V. Position
Fine sync
Tracking
Computer Input
Overscan
Hold
User
ITEM
H. Position
V. Position
Fine sync
Tracking
Computer Input
Overscan
Hold
User
Clamp Position
Clamp Width
LPF
Shutter(U)
Shutter(L)
Shutter(LS)
Shutter(RS)
• Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.
• When you change the value of the horizontal or vertical position drastically, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary
even when the value is changed. These conditions are not a malfunction.
• Shutter does not work correctly during keystone adjustment.
• When you increase the value of Overscan, noise may appear on the screen.
Important:
• You can set the Picture, Signal, and Signal-User menus only when the signal is inputted.
Signal
Auto
90%
On
OK
Adjust Exit
MENU
Select
SETTING FUNCTION
0-999 Select this setting to adjust the horizontal position of projected images.
0-999 Select this setting to adjust the vertical position of projected images.
0-31 Select this setting to eliminate flickering or blurs, if they appear, when you are
viewing projected images.
0-2800 Select this setting to eliminate vertical wide stripes, if they appear, when you are
viewing projected images.
Auto Automatically sets the appropriate setting.
RGB Select this setting when you connect the projector to high definition video
equipment having R, G, and B output terminals.
YCbCr/YPbPr Select this setting when you connect the projector to a DVD player or other device
having Y, C
100%-90% Use this setting to adjust the display area of projected images.
Off / On Use this setting to adjust projected images when flagging occurs in the upper
area of the screen.
OK The Signal-User menu is displayed for the following adjustments.
1-255 Use this setting to correct solid white or solid black that appears in projected
images.
1-63 Use this setting to correct solid black that appears in projected images.
On / Off Select this setting to enable or disable LPF.
0-20 Use this setting to adjust projected images when noise appears in the top
part of the image.
0-20 Use to adjust the image when noise appears on the bottom part of the image.
0-20 Use this setting to adjust projected images when noise appears in the left half
of the image.
0-20 Use this setting to adjust projected images when noise appears in the right
half of the image.
0
Clamp Position
0
Clamp Width
0
LPF
0
Shutter(U)
Shutter(L)
Shutter(LS)
Shutter(RS)
Adjust
Select
, and C (or Y, P , and P
B R B
EN-25
User
1
1
Off
0
0
0
0
Exit
MENU
) component video output terminals.
R