Download  Print this page

Color Enhancer - Mitsubishi Electric TX10U User Manual

Hide thumbs

Advertisement

Table of Contents
Image adjustment (continued)
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu.
(See page 25 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the
3. Select your desired color temperature by pressing the
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color temperature):
To customize (and store) the color temperature to your preference, carry out the following procedure. (See page 25 for
menu setting.)
1. Select COLOR TEMP. in the IMAGE menu.
2. Press the
or
button to select USER
3. Press the ENTER button.
4. Press the
or
button to select the desired item.
5. Press the
or
button to adjust the selected item.
6. Repeat steps 4 and 5 for optimum adjustment results.
To cancel the menu:
7. Press the MENU button.
To enable the stored color temperature:
1. Set COLOR TEMP. to USER
About color temperature
There are different variations in white color. Color temperature is a way to show these variations in white. When the
temperature is low, white appears reddish. When the temperature rises, white appears bluish. For example, you can
change the temperature using the following procedures.
To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).
To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).
• If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can't be obtained
even when you maximize CONTRAST in the IMAGE menu.

COLOR ENHANCER

You can set the user-defined balance between the brightness and hue using the menu. (See page 25 for menu
setting.)
1. Display the IMAGE menu.
2. Select COLOR ENHANCER by pressing the
3. Select USER
by pressing the
4. Press the ENTER button.
• The detailed menu for the color enhancer is displayed.
5. Press the
or
button to select BrilliantColor™ or GAMMA MODE.
6. Press the
or
button to adjust the selected item.
or
button.
.
in the IMAGE menu.
or
button.
or
button.
EN-35
or
button.
When USER is selected:

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric TX10U

This manual is also suitable for:

Tw11u

Comments to this Manuals

Symbols: 0
Latest comments: