Mitsubishi Electric TX10U User Manual page 28

INSTALLATION menu (continued)
ITEM
AUTO POWER OFF
AV MUTE TIMER
IMAGE REVERSE
AUTO KEYSTONE
ADVANCED MENU
IMAGE CAPTURE
SPLASH SCREEN
BACK COLOR
AV MUTE MODE
DIGITAL CABLE
• Regardless the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default
whenever the projector is turned on. The LAMP MODE is set to either STANDARD or LOW depending on the setting last
selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on.
• When the STANDBY MODE is set to STANDARD, the audio is inputted from AUDIO IN terminal output during standby mode.
However, no audio is output when the last selected input was HDMI.
• The AUTO POWER OFF function does not work during AV MUTE.
• When STANDBY MODE is set to STANDARD, the fans rotate at very low speed during standby after plugging the power cord
(with 5 second high speed rotation at the beginning) and after turning off the lamp. This is to cool down the projector operating
various functions during standby and is not a malfunction. When STANDBY MODE is set to LOW or LAN, the fans stop during
standby.
SETTING
OFF / 5min-8HOUR
OFF / ON
OFF
MIRROR
INVERT
MIRROR INVERT
OFF / ON
ENTER
OK
ON / OFF
BLUE / BLACK /
IMAGE
BLACK / IMAGE
STANDARD
FINE ADJ1 / FINE ADJ
2
FUNCTION
When no video signal is input and no operation is made, the projector
automatically turns off after the selected time period. A dialog is displayed 5
minutes before the projector turns off.
When ON is chosen, AV MUTE is automatically canceled when the muting
continues for one hour.
Select when viewing images projected from in front of the screen with the
projector installed on the floor.
Select when viewing images projected from behind the screen with the
projector installed on the floor.
Select when viewing images projected from behind the screen with the
projector installed on the ceiling.
Select when viewing images projected from front of the screen with the
projector installed on the ceiling.
Choose ON to automatically correct the distorted image.
The ADVANCED MENU is displayed for the following settings.
Use to capture the screen for the splash screen. (See page 43.)
Choose ON or OFF to display the splash screen when the power is turned on.
Use to select the background from among BLUE, BLACK and IMAGE, which
will be displayed when there is no signal input from the source. When IMAGE is
selected, the splash screen will be displayed.
Use to select the background when the AV MUTE button is pressed.
Select STANDARD for normal use.
Use to adjust the amount of transmission signal correction when a long cable is
used.
EN-28