Menu Items; Image Menu - Mitsubishi Electric TX10U User Manual

Menu items

Set the following items provided in the respective menus.

IMAGE menu

ITEM
COLOR ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
MANAGEMENT
COLOR
TINT
SHARPNESS
3D
3D FORMAT
3D SYNC INVERT
SETTING
AUTO
PRESENTATION
STANDARD
THEATER
BLACK BOARD
WHITE BOARD
USER
±30
±30
STANDARD / LOW /
HIGH
USER
ENTER
±10
±10
±5
ON / OFF
AUTO
SIDE BY SIDE
TOP AND BOTTOM
FRAME SEQUENTIAL
ON / OFF
FUNCTION
Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
Select to make the displayed image look bright and crisp.
Select to make the displayed image look natural.
This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
Reproduces natural color tones when images are projected directly onto a
black board.
Reproduces natural color tones when images are projected directly onto a
white board.
Select to set the BrilliantColor
Use to adjust the contrast of the projected image. (See page 34.)
Use to adjust the brightness of the projected image. (See page 34.)
Select from the predetermined color temperatures.
Use to adjust the color temperature to a desired value. (See page 35.)
The COLOR MANAGEMENT MENU is displayed. Select to emphasize only
certain colors or to correct the tonal deviation of only certain colors.
(See page 36.)
Use to adjust the color thickness of the projected image. (See page 34.)
Use to adjust the color tint of the projected image. (See page 34.)
Use to adjust the sharpness of the projected image. (See page 34.)
Set to ON/OFF of 3D display.
Automatically distinguishes the type of the input signal and displays 3D images
when 3D image signals are inputted or 2D images (normal images) when 2D
image signals are inputted (only when the signal from the HDMI terminal is
inputted).
Select this setting when 3D images are inputted in the side by side format.
Select this setting when 3D images are inputted in the top and bottom format.
Select this setting when 3D images are inputted in the frame sequential format.
Switches the order of the image for left eye and for right eye.
EN-26
™
and GAMMA MODE. (See page 36.)