Installation - Miele CS 1223-1 Operating And Installation Instructions

Installation

Preparing the worktop
 Make the worktop cut-out as shown
in "Building-in dimensions" or as cal-
culated (see Building-in several
CombiSets). Observe the safety dis-
tances (see "Safety distances").
Wooden worktops
 Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture. The sealant must be heat-
resistant.
Make sure that the sealant does not
come into contact with the top of the
worktop.
40
 Position the spring clamps  and
spacer bars  on or at the top edge
of the cut-out in the positions shown.
 Secure the spring clamps  and
spacer bars  with the 3.5 x 25 mm
wood screws supplied.