Operating The Wireless Beltpack; Overview Of The Wireless Beltpack - ClearCom FreeSpeak II User Manual

7

Operating the wireless beltpack

This chapter explains how to operate the FS II beltpack. It contains the following
sections:
 Overview of the wireless beltpack
 Beltpack user controls
 Using the beltpack
7.1

Overview of the wireless beltpack

An FS II wireless beltpack gives you simultaneous access to up to five channels of
talk/listen communication, with the ability to switch among them as desired. Any
or all of these routes may be kept open during use. You can adjust Incoming
volume levels ("listen levels") using the two rotary level controls, so that one
conversation can be monitored in the background while a primary conversation is
held.
Note: The FS-II beltpack has an IP rating of 65.
The panel display contains the role (label) of the beltpack user, identifies up to
four talk/listen labels currently selected, and gives other information such as
signal strength and battery level. You can choose between two display modes:
 Intercom display mode – displays key labels, role name, signal strengths,
battery level and volume levels.
Page 85
User Guide | FreeSpeak II™ Base station version
Figure 7-1 FreeSpeak II beltpack