Table of Contents
Advertisement
The generic wireless partyline group labels WP#01 through WP#05 appear on the
top row, and their editable versions appear on the lower row. The default values
are WPL01 through WPL05.
2)
From the AVAILABLE GROUPS menu, select a group label. A menu appears
that gives the options for programming the selected group, as in Figure
6-13 Select label from the menu.
3)
Select LABEL from the menu.
A menu to edit that group label appears, as shown in Figure 6-14 Group name
edit menu.
4)
Scroll to and select the alphanumeric character to be changed. A box
appears around the character.
5)
Rotate the setup/enter encoder. As the encoder is rotated the entire range
of available characters appears, starting with upper-case characters,
proceeding to lower-case characters, then to digits, and finally to
punctuation characters.
6)
When the desired new character appears, press the setup/enter encoder
to select it. The box disappears, and is replaced by the solid highlight.
7)
Repeat steps 4 through 6 for all the characters in the label that are to be
changed.
Page 65
Figure 6-12 Wireless partyline group labels
Figure 6-13 Select label from the menu
Figure 6-14 Group name edit menu
User Guide | FreeSpeak II™ Base station version
Advertisement
Table of Contents
Need help?
Do you have a question about the FreeSpeak II and is the answer not in the manual?
Questions and answers