Accessing Beltpack Information; Setting Display Mode; Setting System Connect - ClearCom FreeSpeak II User Manual

8.10 Accessing beltpack information

You can access a list of beltpack information, including battery and fault-finding
information.
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Information.
You can read the following information:
Beltpack role
SW (software)
Beltpack. ID (beltpack identity)
RFP (Remote Fixed Part –
antenna/receiver)
Regional (radio frequency area)
Battery Level

8.11 Setting display mode

You can select between two display modes: Intercom mode and Partyline mode.
Note: You can only access this option if you have advanced menu access.
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Display Mode.
3) Use either rotary control to select between:

8.12 Setting system connect

Use this option to connect to an antenna.
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select System Connect.
Page 113
Item
Table 18 Beltpack information
 Intercom mode
 Partyline mode
User Guide | FreeSpeak II™ Base station version
Role name
Version number
ID number
ID number
Radio frequency region.
Percentage charge, hours of use
Value