HP netserver e 800 Service Manual page 48

Chapter 4
Code Description
0B3x Processor Module conflict
42
Problem/Solution
Utility to avoid a blank or unreadable screen at
power-up.
2. Use the Setup Utility to manually set the video
refresh rates to the highest ergonomic refresh rates
supported by the display. Refer to display monitor's
User's Guide for specifications.
POST has detected the processor modules installed in the
NetServer are not the same type or speed.
To correct this:
1. Ensure both processor modules in the NetServer
have the same product code, which should include
the type, heat sink, and speed.
2. If not, replace one or both to ensure both are the
same product code.
This problem must be corrected to avoid possible
malfunction or reliability problems.
Diagnostics