HP netserver e 800 Service Manual page 12

Chapter 1
•
The Power Connector accepts a standard power cable to connect the HP NetServer E 800 with
the site power supply.
•
The Mouse Port accepts a standard mouse with a PS/2 connector.
•
The Keyboard Port accepts a standard keyboard with a PS/2 connector.
•
The LAN port is included as an embedded controller based on the Intel 82559 10/100 Base T
Fast Ethernet PCI board. It has a RJ-45 LAN connector and two LEDs to indicate LAN speed
and valid connection.
•
Two USB ports are provided for printers, scanners, and external modems.
•
The Serial Port A is a standard serial connector.
•
The Parallel Port is a standard parallel connector, which supports Extended Capabilities Port
(ECP) / Enhanced Parallel Port (EPP).
•
The Serial Port B is a standard serial connector.
•
A Video SVGA Port provides the video output and its specifications are listed in Chapter 2.
•
The external SCSI connector is provided by the optional HP NetServer E 800 Internal/External
SCSI Cable Kit (P/N P1774A).
Serial Port A
Parallel Port
Serial Port B
Video SVGA
6
Power
Mouse
Keyboard
LAN
USB(2)
NetServer – Rear View
General Information
Strain
Relief
Key Lock
External SCSI
Port (Optional)