Vega VEGAPULS 63 Operating Instructions Manual page 39

Reset
VEGAPULS 63 • Profibus PA
6 Set up with the display and adjustment module PLICSCOM
→
Push [ESC]
Information:
The simulation is automatically terminated 10 minutes after the last
pressing of a key.
Simulation
Start simulation?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the follow-
ing menu items to the reset values (see chart):
Function
Sensor address
Max. adjustment
Min. adjustment
Medium
Vessel form
Damping
Linearization
Channel
Sensor-TAG
Displayed value
Extended settings
Additional PA value
Out-Scale-Unit
PV-Out-Scale
Unit of measurement
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function
Sensor address
Language
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
4)
Sensor-specific basic adjustment.
2)
Depending on the sensor type, see chapter "Technical data".
3)
Special parameters are parameters which are set customer-specifically on
4)
the service level with the adjustment software PACTware.
2)
Reset value
126
0 m(d)
Meas. range end in m(d)
Liquid
not known
0 s
Linear
PV lin. %
Sensor
PA-Out
None
Secondary Value 1 %
%
0.00 lin-% = 0.0 %
100.0 lin-% = 100 %
m(d)
Reset value
No reset
No reset
3)
39