Enabling Access Control; Managing User Groups - Qiagen QIAgility User Manual

Enabling access control

Upon installation, the QIAgility Software user access control features are disabled and all users have "Manager" access. (See
the previous section for user group descriptions.)
A Manager enables the user access control with Options > User management > Enable access control.
You can toggle between enabled and disabled states. A tick appears next to Enable access control when this option is enabled.
If the access control is enabled it is directly active. Be careful to enable the access control only if you are a Manager.

Managing user groups

If your computer belongs to a domain, the user groups have to be created and used in the domain. If you are working with a
stand alone computer, the user groups are created and used locally. In both cases, local Administrators have full access to the
software.
If you are a Manager, you can use the management functions on the menu bar Options > User Management > Users & Groups
to change the groups membership. You must be an Administrator to save your changes.
To set the groups membership of users on the laptop computer:
1. Open the Options menu, and select User management > Users & Groups.
2. The "Users & Groups" window appears.
3. Select the user from the Users panel.
4. Select the group to which the selected user should be assigned (i.e., "Administrators", "QIAgility Manager", "QIAgility
Designer", or "QIAgility Operator") in the Windows Groups panel.
QIAgility Version 4.18 User Manual 06/2023 62