Enabling Access Control; Managing User Groups - Qiagen QIAcube HT User Manual

Enabling access control

Upon installation, the QIAcube HT Software user access control features are disabled and all users have "Manager" access (see
the previous section for user group descriptions).
A Manager enables the user access control with Options > User management > Enable access control.
You can toggle between enabled and disabled states. A tick appears next to "Enable access control" when this option is enabled.
If the access control is enabled it is directly active. Be careful to enable the access control only if you are a Manager.

Managing user groups

The user groups will always be managed on the local laptop where the software is installed even if you are connected to a
domain.
If you are a Manager you can use the management functions on the menu bar Options > User Management > Users & Groups
to change the group's membership. You need the right to elevate to an Administrator to really save your changes.
To set the group's membership of users on the laptop computer:
1. Open the Options menu, and select User management > Users & Groups.
2. The "Users & Groups" window appears.
3. Select the user from the "Users" panel.
4. Select the group to which the selected user should be assigned (i.e., Administrators, QIAcube HT Manager, QIAcube HT
Designer, or QIAcube HT Operator) in the "Possible Groups" panel.
QIAcube HT Version 4.17 User Manual 06/2023 87