Konica Minolta CM-2600d Instruction Manual page 91

Specular
Type
component
I+E
Box
tolerance
SCI or SCE
Elliptical
I+E
tolerance
SCI or SCE
• The following deviation directions can be indicated by a message.
L*: LIGHTER/DARKER
a*: +RED (stronger red)/-RED (weaker red)/+GREEN (stronger green)/-GREEN (weaker green)
b*: +YELLOW (stronger yellow)/-YELLOW (weaker yellow)/BLUE (stronger blue)/-BLUE (weaker blue)
C*: DULLER/VIVID
H*: +RED (stronger red)/+YELLOW (stronger yellow/+GREEN (stronger green)/+BLUE (stronger blue)
The pass/fail judgment made based on the specified elliptical tolerances will be displayed by "PASS" or "FAIL"
on the right of " E*".
N
ote
• If color difference tolerances have not been specified, pass/fail judgment result ("PASS" or "FAIL") will not
be displayed.
• If no color target has been selected, the tint and brightness deviation direction and color difference will not be
displayed.
• No message may appear if the color difference is excessively small.
Pass/fail
Displayed value
judgment
Color difference PASS
E* FAIL
Color difference PASS
E* FAIL
PASS
Color difference
FAIL
PASS
E*
FAIL
Color difference No judgment
PASS
E*
FAIL
Display content
Measured value, with "PASS" to the right
Highlighted measured value, with highlighted
message to the right
Measured value, with "PASS" to the right
Highlighted measured value, with highlighted
"FAIL" to the right
Measured value, with "PASS" to the right.
Highlighted measured value, with highlighted
"FAIL" and message to the right
Measured value, with "PASS" to the right
Highlighted measured value, with highlighted
"FAIL" to the right
Measured value, with message to the right
Measured value, with "PASS" to the right
Measured value, with highlighted "FAIL" to the
right
Assessments
E-89