Konica Minolta CM-2600d Instruction Manual page 45

• "T*" does not appear if "defined in COND." mode is selected.
M
emo
Selecting "CALIBRATION" by turning B and pressing A will display the <CALIBRATION>
screen. So, perform the desired calibration according to step 3 and subsequent steps given in "Zero Calibra-
tion" (from page E-44) or "White Calibration" (from page E-46).
N
ote
Depending on the target mode selected, some of the options displayed will be different.
<Performing Measurement>
Turn B to select "BREAK", then press A.
The <measurement> screen will ap-
pear.
<Setting a Measurement Condition for another <COND
Turn B to select "PREV", then press A.
Measurement condition setting
will be complete, and the
<COND > screen will reappear.
*
• "T*" is the number of the color difference target data for the next measurement. If nothing is selected,
"T---" appears.
Setting a Measurement Condition
* >
E-43