Konica Minolta CM-2600d Instruction Manual page 56

Setting Color Difference Tolerances
3
Turn B to select the desired target color no. (T
"E" will return to "D"
• Keeping B held down to left or right will cause the target color No. to change continuously.
4
Turn B to select "TOLERANCE", then press A.
A screen that allows selection of
the tolerance type will appear.
If tolerances have already been
set, they will be displayed, so
skip to step 6.
5
Turn B to select "BOX", then press A.
6
Turn B to select "ADJUST", then press A.
E-54
.
• Example when "M/I+E" is set for "MASK/GLOSS" condition
item.
• Example when "M/SCI" is set for "MASK/GLOSS" condition
item.
), then press A.
*