Maintain Your Blood Glucose Monitor System - Braun Omnitest 3 Manual

Maintain Your Blood Glucose Monitor System

For safe, accurate, and long-term use of Omnitest® 3, be sure
that the meter is maintained with proper care. Clean and dry
your hands before use to prevent any damage of the meter and
the test strips.
The meter should be cared after test, and cleaned if neces-
sary with soft cloth or paper tissues. Objects which had
been in contact with blood bear the potential risk for trans-
mitting an infectious disease. If necessary, alcohol swabs
can be used to wipe out dirt on the outer surface of the
meter, but chemical solution such as benzene or acetone
MUST NOT be used since either of those can harm and
damage the meter surface.
When cleansing the meter with pure alcohol, DO NOT pour
directly onto the meter, but use the cloth soaked with a
small amount of alcohol. After cleansing the meter,
dry completely at a cool place avoiding direct sun light.
The meter or the test strips are not to be placed into
water or any other liquid.
Do not put the meter and strip near fire or microwave
ovens. Strong electromagnetic fields (e.g. mobile phones,
microwave ovens) could disturb the meter function.
Omnitest® 3 complies with the requirements concerning
electromagnetic compatibility and electromagnetic
emission (according to IEC 61326).
- 56 -