Braun Omnitest 3 Manual page 52

Testing Your Blood Glucose
The measurement chamber of the test strip will draw automati-
cally the blood of your finger. Your finger should remain still,
until the confirmation window is completely filled and you hear
the "beep" sound.
The minimal sample volume is 0.3 µL.
Do not allow blood to flow aside the test strip into the meter.
This could lead to malfunction.
! NOTE: Do not force your finger against the test
strip. Do not try to apply a smeared sample. Do not add
blood to the test strip after the "beep" sound. Do not
squeeze the fingertip. The meter will power off automati-
cally after 3 minutes, if no testing was done on the test
strip. In this case, you have to reinsert the test strip.
- 52 -