Pioneer SC-LX901 Basic Manual page 9

> Before start > Hookup
Speaker combinations
In any of the combinations, up to two powered subwoofers can be connected.
Speaker
FRONT
Channels
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch
7.1 ch
2.1.2 ch
3.1.2 ch
4.1.2 ch
5.1.2 ch
6.1.2 ch
7.1.2 ch
4.1.4 ch
5.1.4 ch
6.1.4 ch
7.1.4 ch
Points to note with speaker combinations
＊ 1: It is not possible to use Speaker B, Bi-AMP, and ZONE speakers at the same time. However, with 2.1
ch to 7.1 ch, it is possible to use Bi-AMP (FRONT) and ZONE 2 speakers at the same time.
＊ 2: You can also use Bi-Amping connections with Speakers B.
＊ 3: If front speakers are to be Bi-Amping connected, height speakers need to be connected to the
HEIGHT 2 jacks.
＊ 4: ZONE 2 speakers need to be connected to the HEIGHT 1 jack, ZONE 3 speakers need to be
connected to the SURROUND BACK jacks, and height speakers need to be connected to the
HEIGHT 2 jacks.
> Setup > Playback > Part Names
SURROUND
CENTER SURROUND
BACK
SP B
HEIGHT 1 HEIGHT 2
(Speaker B)
＊ 3
＊ 3
＊ 3
＊ 3
＊ 3
＊ 3
HEIGHT 1/HEIGHT 2
When connecting 2 sets of height speakers, the height speaker combinations you can choose are as follows.
– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High
– Height 1 Speaker: Front High, Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled
Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top
Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
When connecting only one set of height speakers, select one type of height speakers from the types
available.
> Advanced Manual
Troubleshooting | Appendix
ZONE 2
＊ 1 ＊ 1
Bi-AMP
＊ 1
( P19)
＊ 2
FRONT
FRONT,
＊ 2
FRONT/CENTER
FRONT,
＊ 2
FRONT/SURROUND
FRONT,
FRONT/CENTER,
FRONT/SURROUND,
＊ 2
CENTER/SURROUND,
FRONT/CENTER/
SURROUND
＊ 2
FRONT
＊ 2
FRONT
FRONT
FRONT
FRONT
FRONT
FRONT
FRONT
ZONE 3
＊ 1
( P20)
＊ 4
＊ 4
＊ 4
＊ 4
9