Pioneer SC-LX901 Basic Manual page 51

> Specifications > Settings
■ Distance
Set the distance from each speaker to the listening position. Press
controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC
Memory".
Setting Item Default Value
Front Left 10' 0" / 3.00 m
Center 10' 0" / 3.00 m
Front Right 10' 0" / 3.00 m
Height 1 Left 10' 0" / 3.00 m
Height 1 Right 10' 0" / 3.00 m
Height 2 Left 10' 0" / 3.00 m
Height 2 Right 10' 0" / 3.00 m
Surround Right 10' 0" / 3.00 m
Surr Back Right 10' 0" / 3.00 m
Surr Back Left 10' 0" / 3.00 m
Surround Left 10' 0" / 3.00 m
Subwoofer 1 10' 0" / 3.00 m
Subwoofer 2 10' 0" / 3.00 m
• Default values vary depending on the regions.
• Distance units can be switched by pressing MODE on the remote controller. When the unit is set as
feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters,
you can set between 0.01 m and 9.00 m in increments of 0.01 m.
> Listening Modes > Playback Function
on the remote
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
■ Channel Level
Set the volume level of the speakers. If multiple settings are saved in the MCACC Memory,
press on the remote controller, and select the MCACC Memory first in "AV Adjust" -
"MCACC" - "MCACC Memory".
Setting Item Default Value
Front Left 0.0 dB
Center 0.0 dB
Front Right 0.0 dB
Height 1 Left 0.0 dB
Height 1 Right 0.0 dB
Height 2 Left 0.0 dB
Height 2 Right 0.0 dB
Surround Right 0.0 dB
> Basic Manual
Troubleshooting | Appendix
Setting Details
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
15