Pioneer SC-LX901 Basic Manual page 115

> Specifications > Settings > Listening Modes > Playback Function
necessary.
• If the unit is installed in a rack or cabinet with colored-
glass doors or if the doors are closed, the remote
controller may not work reliably.
• After operating the Multi-zone function, the remote
controller may have switched to the mode for operating
ZONE output audio. Check "Multi-zone" in "Playback" in
the Basic Manual to switch the remote controller back to
the mode for operating in the main room.
Display, OSD
■ The display doesn't light
• The display may go dim while the Dimmer is working,
and may also turn off. Press DIMMER button and
change the brightness level of the display.
Others
■ Strange noises can be heard from the unit
• If you have connected another unit to the same wall
outlet as this unit, this noise may be an effect from the
other unit. If the symptoms improve by unplugging the
power cord of the other unit, use different wall outlets for
this unit and the other unit.
■ When performing Full Auto MCACC, the message
"Noise Error" appears
• This can be caused by a malfunction in your speaker
unit. Check if the unit produces normal sounds.
■ DRC function does not work
• Make sure the source material is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, or DTS.
> Basic Manual
Troubleshooting | Appendix
79