Pioneer SC-LX901 Basic Manual page 57

> Specifications > Settings
Setting Item Default Value
Auto Delay On
> Listening Modes > Playback Function
Setting Details
This setting automatically corrects any
desynchronization between the video and audio
signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled
"Off": Automatic correction will be disabled
■ Power Management
Setting Item Default Value
Sleep Timer Off
Auto Standby On/Off
Auto Standby in (Off)
HDMI Standby
Through
> Basic Manual
Troubleshooting | Appendix
Setting Details
Allows the unit to enter standby automatically when
the specified time elapses. Select a value from "30
minutes", "60 minutes", and "90 minutes".
"Off": Does not turn the unit to standby
automatically
This setting places the unit on standby
automatically after 20 minutes of inactivity without
any video or audio input. (When "Network Standby"
is on, this becomes the HYBRID STANDBY mode
which reduces the increase in power consumption
to a minimum.)
"On": The unit will automatically enter standby
mode ("AUTO STBY" will light.)
"Off": The unit will not automatically enter standby
mode
• "Auto Standby" is displayed on the display and
TV screen 30 seconds before the Auto Standby
comes on.
• "Auto Standby" does not work when Zone 2/
Zone 3 is active.
• Default values vary depending on the regions.
Enable or disable "Auto Standby" while "HDMI
Standby Through" is on.
"On": The setting will be enabled
"Off": The setting will be disabled
• This setting cannot be set to "On" if "Auto
Standby" and "HDMI Standby Through" are set
to "Off".
21