Connecting A Power Amplifier - Pioneer SC-LX901 Basic Manual

> Specifications > Settings

Connecting a Power Amplifier

You can connect a power amplifier to the unit and use the
unit as a pre-amplifier in order to produce a large volume
that cannot be output with the unit only. Connect the
speakers to the power amplifier. For details, refer to the
power amplifier's instruction manual.
■ Connections
1. Connect as below using the PRE OUT terminals.
Power amplifier
• Set to suit the number of speaker channels
connected.
− Press
on the remote controller to display
the Setup menu. Select "2. Speaker" -
"Configuration" - "Speaker Channels" in order
with the cursors, and set the number of speaker
channels.
• You can reduce power consumption by turning off
the power of the SPEAKERS terminals you are
not using on this unit. Make the setting in "System
50
> Listening Modes > Playback Function
Setup" - "Miscellaneous" - "Preamp Mode".
> Basic Manual
Troubleshooting | Appendix