General Specifications - Pioneer SC-LX901 Basic Manual

> Specifications > Settings > Listening Modes > Playback Function

General Specifications

■ Amplifier Section
(North American)
Continuous average power output (＊1)
140 W (＊2) per channel (8 Ω)
200 W (＊3) per channel (6 Ω)
＊1. Measured pursuant to the Federal Trade
Commission's Trade Regulation rule on Power
Output Claims for Amplifiers
＊2. 1 kHz with no more than 0.08% (＊4) total harmonic
distortion
＊3. 1 kHz with no more than 1% (＊4) total harmonic
distortion
＊4. Measured by Audio Spectrum Analyzer
Multi channel simultaneous power output (1 kHz, 1%, 8 Ω)
880 W (11 ch total)
Continuous Power Output (1 kHz, 8 Ω, 0.08%)
140 W+140 W (Front)
140 W (Center)
140 W+140 W (Surround)
140 W+140 W (Surround back)
140 W+140 W (Height1)
140 W+140 W (Height2)
Continuous Power Output (1 kHz, 6 Ω, 1.0%)
200 W+200 W (Front)
200 W (Center)
200 W+200 W (Surround)
200 W+200 W (Surround back)
200 W+200 W (Height1)
200 W+200 W (Height2)
Continuous Power Output (1 kHz, 4 Ω, 1.0%)
255 W+255 W (Front)
255 W (Center)
255 W+255 W (Surround)
255 W+255 W (Surround back)
255 W+255 W (Height1)
255 W+255 W (Height2)
(European)
Multi channel simultaneous power output (1 kHz, 1%, 8 Ω)
880 W (11 ch total)
Rated power output (1 kHz, 4 Ω, 1%, 1 ch Driven)
280 W per channel
Rated power output (1 kHz, 6 Ω, 1%, 1 ch Driven)
200 W per channel
(Australian)
Maximum power output (1 kHz, 4 Ω, 10%, 1 ch Driven)
340 W per channel
(Asian)
Multi channel simultaneous power output (1 kHz, 1%, 8 Ω)
880 W (11 ch total)
Maximum power output (1 kHz, THD 10%, 4 Ω, 1 ch
Driven)
340 W per channel
Rated power output (1 kHz, 4 Ω, 1%, 1 ch Driven)
280 W per channel
Rated power output (1 kHz, 6 Ω, 1%, 1 ch Driven)
200 W per channel
THD+N (Total Harmonic Distortion+Noise)
0.04% (1 kHz, 100 W)
Input Sensitivity and Impedance (1 kHz, 100 W/8 Ω)
200 mV/82 kΩ (LINE (Unbalance))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/470 Ω (PRE OUT)
1 V/470 Ω (SUBWOOFER PRE OUT)
200 mV/1.2 kΩ (ZONE LINE OUT)
2 V/1.2 kΩ (ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5%)
Tone Control Characteristics
±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
108 dB (IHF-A, LINE IN, SP OUT)
90 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 Ω - 16 Ω
Headphone Output Impedance
> Basic Manual
Troubleshooting | Appendix
43 Ω
Headphone Rated Output
57 mW (32 Ω, 1 kHz, 10% THD)
■ Video Section
Signal level
1 Vp-p/75 Ω (Composite Video)
1 Vp-p/75 Ω (Component Video Y)
0.7 Vp-p/75 Ω (Component Video PB/PR)
Maximum resolution supported by component video
1080i (＊)
＊ When output from HDMI, only 480i/576i resolution
＊
input is possible.
■ Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (Others)
Preset Channel
40
■ Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi standard)
R
5 GHz/2.4 GHz band
■ BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
3