Pioneer SC-LX901 Basic Manual page 53

> Specifications > Settings
Audio Adjust
Make advanced settings such as those related to multiplex audio or those related to the
volume of this unit.
■ Dual Mono/Mono
Setting Item Default Value
Dual Mono Main
Mono Input Left+Right
Channel
■ Dolby
Setting Item Default Value
Loudness On
Management
> Listening Modes > Playback Function
Setting Details
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be output
at the same time.
• If multiplex audio is being played, "1＋1" will be
displayed when on the remote controller is
pressed.
Set the input channel to use for playing any 2 ch
digital source such as Dolby Digital, or 2 ch analog/
PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
Setting Details
When playing Dolby TrueHD, enable the dialog
normalization function which keeps the volume
of dialog at a certain level. Note that when this
setting is Off, the DRC function that allows you to
enjoy surround at low volumes is fixed to off when
playing Dolby Digital Plus/Dolby TrueHD.
"On": Use this function
"Off": Do not use this function
■ Volume
Setting Item Default Value
− dB
Mute Level
Volume Limit Off
Power On Level Last
Headphone Level 0.0 dB
> Basic Manual
Troubleshooting | Appendix
Setting Details
Set the volume lowered from the listening volume
when muting is on. Select a value from "− dB",
"−40 dB", and "−20 dB".
Set the maximum value to avoid too high volume.
Select "Off" or a value between "−32 dB" and "＋
17 dB".
Set the volume level of when the power is turned
on. Select a value from "Last" (volume before
entering standby mode), "− dB", and "−81.5 dB"
to "＋18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Adjust the output level of the headphones. Select a
value between "−12.0 dB" and "＋12.0 dB".
17