Pioneer SC-LX901 Basic Manual page 69

> Specifications > Settings
Manual MCACC
When Full Auto MCACC is run, a variety of speaker settings are made automatically,
but Manual MCACC enables you to make further adjustments manually, giving you the
opportunity to make even more detailed settings.
• Before making these adjustments, run Full Auto MCACC first.
• Depending on the settings, speakers may emit test tones at high volume during
measurement, so be careful of your surroundings.
• If multiple settings are saved in the MCACC Memory, press
and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC Memory".
■ Fine Channel Level
Adjust the volume level of the speakers while listening to the test tone. After firstly adjusting
the Front Left speaker to the desired volume, adjust the volume level so that each channel
is the same level, starting from the Front Right speaker. Test tone output alternates
between the selected speaker and the benchmark speaker, so adjust the volume so it
becomes the same.
Setting Item Default Value
Front Left 0.0 dB
Front Right 0.0 dB
Center 0.0 dB
Height 1 Left 0.0 dB
> Listening Modes > Playback Function
on the remote controller,
Setting Details
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Front Left speaker, so adjust the
volume so it becomes the same.
Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Front Left speaker, so adjust the
volume so it becomes the same.
Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Front Left speaker, so adjust the
volume so it becomes the same.
Setting Item Default Value Setting Details
Height 1 Right 0.0 dB Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Height 1 Left speaker, so adjust the
volume so it becomes the same.
Height 2 Left 0.0 dB Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Front Left speaker, so adjust the
volume so it becomes the same.
Height 2 Right 0.0 dB Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Height 2 Left speaker, so adjust the
volume so it becomes the same.
Surround Left 0.0 dB Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Front Left speaker, so adjust the
volume so it becomes the same.
Surround Right 0.0 dB Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Surround Left speaker, so adjust the
volume so it becomes the same.
Surr Back Left 0.0 dB Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Surround Left speaker, so adjust the
volume so it becomes the same.
Surr Back Right 0.0 dB Select a value between "−12.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Surround Back Left speaker, so adjust
the volume so it becomes the same.
> Basic Manual
Troubleshooting | Appendix
33