Pioneer SC-LX901 Basic Manual page 63

> Specifications > Settings
Setting Item Default Value
USB Off
BT AUDIO Off
> Listening Modes > Playback Function
Setting Details
Set the 12V trigger output setting to each input.
• To use this function, set "HDMI Out" to "Off" in
advance.
"Off": No output
"Main": Output when "USB" is selected as input
source for the main room.
"Zone2": Output when "USB" is selected as input
source for ZONE2.
"Zone3": Output when "USB" is selected as input
source for ZONE3.
Set the 12V trigger output setting to each input.
• To use this function, set "HDMI Out" to "Off" in
advance.
"Off": No output
"Main": Output when "BT AUDIO" is selected as
input source for the main room.
"Zone2": Output when "BT AUDIO" is selected as
input source for ZONE2.
"Zone3": Output when "BT AUDIO" is selected as
input source for ZONE3.
Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
■ Zone 2
Setting Item Default Value
Output Level Fixed
Volume Limit Off
Power On Level Last
Bass 0 dB
Treble 0 dB
Balance 0
> Basic Manual
Troubleshooting | Appendix
Setting Details
Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Set the maximum value for Zone 2 to avoid too
high volume. Select "Off" or a value between "−32
dB" and "＋17 dB".
Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "− dB", and "−
81.5 dB" to "＋18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Adjust the volume of the bass for Zone 2. Select a
value between "−10 dB" and "＋10 dB".
Adjust the volume of the treble for Zone 2. Select a
value between "−10 dB" and "＋10 dB".
Set the left-right balance for Zone 2. Select a
between "L ＋ 10" to "R ＋ 10".
27