Pioneer SC-LX901 Basic Manual page 70

> Specifications > Settings
Setting Item Default Value
Subwoofer 1 0.0 dB
Subwoofer 2 0.0 dB
34
> Listening Modes > Playback Function
Setting Details
Select a value between "−15.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone
output alternates between this speaker and the
benchmark Front Left speaker, so adjust the
volume so it becomes the same.
Select a value between "−15.0 dB" and "＋
12.0 dB" (in 0.5 dB increments). Test tone output
alternates between this subwoofer and the
benchmark Subwoofer 1, so adjust the volume so it
becomes the same.
■ Fine Speaker Distance
Make fine adjustments to the distance of the speakers from the listening position while
listening to the test pulse. After firstly setting the measured distance of the Front Left
speaker from the listening position, adjust the distance of the other speakers, starting
with the Front Right speaker. The test pulse is output from the selected speaker and the
benchmark speaker, so adjust the distance so the point where the test pulse is heard is in
the middle of the two speakers.
Setting Item Default Value
Front Left 10' 0" / 3.00 m
Front Right 10' 0" / 3.00 m
Center 10' 0" / 3.00 m
Height 1 Left 10' 0" / 3.00 m
Height 1 Right 10' 0" / 3.00 m
Height 2 Left 10' 0" / 3.00 m
Height 2 Right 10' 0" / 3.00 m
> Basic Manual
Troubleshooting | Appendix
Setting Details
Set the measured distance of the Front Left
speaker from the listening position.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and the
benchmark Height 1 Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Right speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.