Saved file type selection mode
Mode defines file types to write to SD memory card.
Refer to Chapter 5.4 for the detail contents of each file.
・Select ON and press <SET> for each type 1, 2 and 3, it writes to SD memory card.
・Select OFF and press <SET> for each type 1, 2, and 3, it doesn't write to SD memory card.
Type1: Instantaneous value file
Type3: Instantaneous value in detail file
・Log cycle is fixed to 15-min for type 1 and type 2.
・Logging data will be saved regardless of the setting.
In order to write to SD memory card with the displayed file type, set to 'ON'.
There are 3 types and you can select ON or OFF for each type.
T1 (type1): Instantaneous value file
ON
T2 (type2): Difference value file
ON
T3 (type3): Instantaneous detailed value file
ON
Log cycle setting mode
Mode defines save cycle for type 3 file.
・Select from 60 / 1 / 5 / 10 / 15 / 30 (min).
It saves measured data with selected cycle.
Press <ITEM/△> to change.
60-minite
Type2: Difference value file
ON: Write data of the latest 8 days.
OFF: Not write
OFF
↓ <SET>
ON: Write data of the latest 8 days.
OFF: Not write
OFF
↓ <SET>
ON: Write the latest 720 records (max.).
OFF: Not write
OFF
↓ <SET>
1-minute
10-minite
↓ <SET>
Monitor
*Only KW2G-H
*Cycle is fixed to 15-minute.
*Cycle is fixed to 15-minute.
*Only KW2G-H
5-minite
15-minite
45
KW2G/ KW2G-H Eco-POWER METER
30-minite