Table of Contents
Advertisement
General-purpose output setting mode
Mode defines a type of general-purpose output.
・Select from PL-L/ PL-F/ PL-O.
'PL-L (Level output)'
'PL-F
(Repeat cycle output)'
'PL-O
(One-shot output)'
*It doesn't work with the on-time and off-time set to under 0.1s.
Press <ITEM/△>,<SET>+<ITEM/△> to change
PL-L
Output ON-time setting mode (※)
Mode defines ON-time of output for 'PL-F' and 'PL-O'.
・It is set the range of 0.1 to 10.0 sec.
Set it using <ITEM/△>, <SET>+<ITEM/△>.
Output OFF-time setting mode (※)
Mode defines OFF-time of output for 'PL-F'.
・It is set the range of 0.1 to 10.0 sec.
Set it using <ITEM/△>, <SET>+<ITEM/△>.
General-purpose output test mode (※)
It tests the general-purpose output.
・Select from OFF/ON.
'ON' ; It can test whether it output correctly or not.
'OFF'; It doesn't test the output.
*Note that it will output when select 'ON' with <ITEM/△>.
Press <ITEM/△> to change.
When the designated data register is 1(ON), it output.
When the designated data register is 1(ON), it repeats on and off
according to the setting.
When the designated data register is 1(ON), it output one time and after
passing the setting time, it turns off the output.
+
↓<SET>
(0.1 to 10.0sec)
↓<SET>
*It is only when 'PL-F' is selected on general-purpose output
(0.1 to 10.0sec)
↓<SET>
OFF
↓<SET>
*It is only when 'OUT' is selected on unit for pulse output
+
PL-F
*It is only when 'PL-F' or 'PL-O' is selected
on general-purpose output setting mode.
ON
39
KW2G/ KW2G-H Eco-POWER METER
setting mode.
PL-O
Increase
Decrease
+
setting mode.
Increase
Decrease
+
Advertisement
Table of Contents
